ATX Smith Cable Rack 680 Plate Loaded

The individual components at a glance:

• Free Dumbbell Rack - Half Rack
• Suitable for all popular barbell exercises
• Massively loadable up to 250 kg
• Train safely at the limit thanks to emergency shelves with a display length of 36 cm, lowest shelf height from the top edge of the floor approx. 25 cm
• J-Hooks & emergency safety racks with protective rubber coating to protect the dumbbell and to minimize noise
• Find your optimal training position thanks to 29-way height-adjustable J-hooks (5 cm grid) - including scaling to reproduce the positions
• Emergency shelves with a display length of 36 cm, lowest shelf height from the top edge of the floor approx. 25 cm
• Multipress - Smith Machine
• Smooth running, low-friction and almost noise-free - with maintenance-free special sliding bushes
• Guide rods made of hardened 25 mm round steel
• Barbell bar 13 times lockable in height
• 30 mm grip diameter with knurling
• Weight plate holder 33 cm long with Ø 30 mm - optionally upgradable to Ø 50 mm using an adapter (item no.: BB-OA-350-PVC)
• Grip width maximum 113 cm
• Can be loaded up to a maximum of 200 kg
• Duo pulling device
• Two cable pull devices that can be used independently of each other
• 17-fold height-adjustable castor units with polyamide slide rails for smooth adjustment - including scaling
• Pulling exercises can be performed from above and below
• Maximum height up to snap hook approx. 185 cm
• Cable pulls can be used individually or simultaneously without restrictions
• Gear ratio 2:1
• Ball-bearing pulleys
• Highly flexible stretch-free steel cable
• Multi pull-up station
• Train in a varied way thanks to various grip variations
• Handle diameter Ø 25 mm / 30 mm
• Optimal for heavy pull-up training with additional weight thanks to high load capacity (max. 200 kg)
• lat pull down machine
• Weight sled for holding weight plates
• Absolutely jerk-free and easy running thanks to maintenance-free special plain bearings
• Solid steel guide shafts
• Highly loadable up to 160 kg
• Length of the recordings approx. 22 cm - Ø 30 mm - optionally upgradable to Ø 50 mm using an adapter (item no.: BB-OA-250-PVC)
• With pull function from above and below - without converting
• Transmission ratio 1:1 - no reduction in resistance due to a pulley effect
• High stretch of approx. 154 cm from the seat of the weight bench (with a seat height of 45 cm) to the lat pull bar
• Robust stretchers for a stable hold during all seated rowing exercises
• Leg pads for fixation during lat pull exercises - 4-way adjustable and can be stowed away on the device to save space
• Extra wide, ball-bearing special rope pulleys with a V-shaped rope groove also enable diagonal pulling exercises
• Highly flexible stretch-free steel cable
• integrated dip station
• Can be attached to the dumbbell rack at a selectable height
• Ø 45 mm strong handles
• Grip width approx. 60 - 70 cm
• Maximum load 160 kg
• Weight Plate Storage Rack
• With 8 chrome-plated 30 mm weight plate holders as mandrels - 4 pieces per side
  - can be optionally upgraded to Ø 50 mm using an adapter (item no.: BB-OA-250-PVC)
• Including rubber buffers
• Length of each spike 25 cm

Note:
The inner dimension (grip width) of the barbell to be used must be at least 125 cm!

Resilience:

• Multipress: max. 200 kg
• J-CUPS (pair) max. 250 kg
• Emergency shelves: (pair) max. 250 kg
• Lat station: 160 kg
• Pull-up station: max. 200 kg
• Dip station: 160 kg
• Weight plate storage rack: max. 120 kg per pin

Scope of delivery:

ATX ^® Smith Cable Rack 680 with lat pull attachment - Plate Load

The dumbbells / weight plates, handles and multi benches shown are extras that are subject to a surcharge and are not included in the scope of delivery!